User manual:

 

For powder fire extinguishers follow the steps below

 

Note before using: When buying a powder fire extinguisher, the user must check the weight of the powder in the jar and check the quality of the extinguisher by. Fire extinguishers with the right quality and origin will be censored by the fire department with labels.

 

Step 1: Shake the bottle

 

It is too simple to perform the following step, when detecting a fire phenomenon, immediately take the powder fire extinguisher to the fire and shake it about 3 to 4 times. help to achieve the standard amount of powder when spraying.

 

Step 2: Remove the safety latch

 

Each powder fire extinguisher head is designed with a steel safety pin and a plastic key, when we pull the plug, we only need to pull the safety pin to break the plastic key to spray.

 

Step 3: Squeeze the trigger

 

After performing step 1, step 2 is done with one hand squeezing the trigger and one hand holding the nozzle towards the fire, when the fire weakens we approach and sweep the nozzle back and forth so the fire is completely extinguished.

 

For trolley powder fire extinguishers, pull the cart closer and direct the spraying roller to the origin of the fire in the direction of the wind, pull the pin and pull the main valve on the mouth of the jar perpendicular to the ground. Hold the steering wheel tightly and follow the wind direction to squeeze the trigger to let the powder spray out.

 

Attention:

 

- When spraying in the wind direction.

 

- Store powder fire extinguishers in a cool place

 

- Check the pressure on the pressure gauge if the red line is recharged.

 

- Do not store for too long, check every 6 months, check weight.